How To Gown Properly In A Clean Room
We use sophisticated electronic devices almost every waking moment. The powerful camera, the processor, and the display are all packed into one slim case. Just from the looks of it, we can conclude that fitting all the small components perfectly is a sensitive task and requires the utmost level of care and protection.
Even a small speck of dust can cause the device to malfunction, and it will have to be taken apart, thereby wasting valuable labor and time. For this reason, device manufacturing companies establish clean rooms that are free from contaminants.
These rooms are so immaculate that even after due care, you can end up contaminating them without even realizing it. Hence, there is a proper protocol that has to be followed when working in a clean room. One such protocol is the proper gowning in clean room suits. In this article, we will talk about how to gown properly in a clean room.
Before getting dressed
In this section, we will talk about the measures that need to be taken before the employees put on their clean room suit. If you are getting ready for the clean room, you must ensure that the skin surface that will be exposed during your time in the room is cleaned properly. Additionally, if you are the clean room manager, you should ask your employees to remove their makeup and other skincare products.
For this, you can use any industry-compliant disinfectant. Now, the employees must ensure that the clothes underneath the suit are clean and have been thoroughly washed. Further, place a sticky mat outside the clean room and ask the entrants to walk over two to three times so that the dirt is removed thoroughly.
Once you have gone through these processes, you are safe to enter the changing room to suit up. However, be mindful when putting on the shoe covers. You want to put them one by one. This means that you have to put the clean foot on the clean side of the room and the dirty foot on the dirty side. This simple practice will drastically reduce the contamination risk.
The Gowning part
Once you have ensured that the entrants have been thoroughly cleaned, it’s time to suit up. The popular clean room suits include coveralls, protective sleeves, lab coats, and frocks. Now, when you are gearing up for the room, you have to ensure that none of the equipment touches the ground.
For this, you have to design the changing room in a way that makes the gearing-up process easier and more efficient. You can incorporate the use of hangers, benches, etc. Additionally, you must ask your employees about their changing habits if you are managing the changing process. This will help you identify the potential risk that your employees might carry. Based on the common changing behavior, you can design transition techniques to make it smoother for the employees.
If your industry works with coveralls, you must ensure that the trousers are neatly tucked inside the boots. While gearing up, if any piece of the suit gets damaged, the changing process will have to be repeated from scratch to avoid any risks. The gloves should fit the hands of the employees perfectly and must be long enough to be tucked inside the sleeves.
Face and Hair
Now that your employees’ bodies are covered with the clean room suit, it’s time to take care of the face and hair. For this, you must ensure that all the employees are wearing head caps at all times. Additionally, hair and beards must be covered with proper equipment. Proper head coverings are the ones that seal the head completely without leaving any gaps.